They are very practical machines, with the operator positioned outside, with the recirculation and the "pneumatic washing" of the abrasive for sandblasting and without release of dust in the external environment, to be used for sandblasting small quantities of small pieces.
It is therefore necessary, in addition to the sandblaster, to have a compressor whose capacity must depend on the type of system and the diameter of the nozzle mounted on the gun.
In these systems a depression is created by means of a Venturi system that sucks the abrasive from the collection hopper and throws it towards the pieces to be blasted: therefore it is possible to use only non-metallic abrasives (corundum, glass microspheres, garnet, microspheres of ceramics, plastic granules, etc.).
Compared to a pressure blasting booth, the abrasive launch speed will be lower and therefore surfaces with a "soft" finish will be obtained.
A filter cabinet can be mounted in case of frequent blasting.
In the case of sporadic use it is possible to mount a filter bag as an alternative.
It is also possible to have optional shot peening equipment:
1) Removable rotary table - for large and / or large pieces
2) Rotating basket: for small metal parts.
3) Filter cabinet
4) Customization is also possible
Vacuum cleaner: 380 Volt
Operating pressure: 1.5 to 8 bar
Air consumption per nozzle:
Ø6 - 600lt / min.
Ø8 - 800lt / min.
Ø10 - 1200lt / min.
Empty weight [kg]
This item is produced exclusively on request, therefore delivery times may vary.
Due to its large size, weight and volume, we are obliged to use special delivery services.
The delivery cost indicated is only a quote, please contact us with the delivery address, so we will provide you with the exact final cost.
Do not hesitate to contact us for more information, we are here to serve you better.
This document was translated with the help go google translator, we apologise for any grammatical error encountered.